Frequently asked questions about 3D printing

The price depends on the part's volume, the material, the technology and the quantity, so the exact price is set after reviewing the 3D model. Send us an STL or STEP file and request a quote.

• Request a 3D printing quote

Single parts are usually ready in 2 to 3 working days; small series take roughly 5 to 10 working days, depending on quantity and technology. Lead times are approximate and confirmed in the quote. Urgent production is possible by arrangement.

Send a 3D model in STL, STEP, OBJ or IPT format, together with the part's purpose, the quantity and your preferred deadline. If you don't have a 3D model, you can send a sketch, technical drawing or photo — we can also help create the 3D model.

• Send a 3D model
• 3D modelling

We can 3D scan an existing part and build a model from the scan through reverse engineering. From a sketch or technical drawing we create a parametric 3D model. The specific solution depends on the project's requirements.

• 3D scanning and reverse engineering
• 3D model creation

FDM suits larger, simpler parts and cost-effective prototypes. SLA enables very fine details and smooth surfaces. SLS suits strong functional parts with complex geometry and small series. If you are not sure which technology fits your project, describe the part's purpose and we will suggest a solution.

• 3D printing services
• SLS 3D printing
• Equipment and specifications

The choice of material depends on load, operating temperature, sun exposure and contact with chemicals. For mechanically loaded parts, nylon and composites reinforced with carbon or glass fibre may be suitable. ASA can be considered for outdoor use, and TPU for flexible parts. The final choice depends on the application conditions and project requirements.

• 3D printing materials

Yes. 3D printing is suitable for small series, from a few dozen to a few hundred pieces, when it makes technical and economic sense. In some cases it can be faster and more cost-effective than making tooling and moulds.

• Small series examples

Accuracy depends on the technology, material, geometry and production conditions. For parts that are assembled, state the critical dimensions and required tolerances, and we will suggest the technology and production method that suit them best.

It depends on the technology: up to 500 × 500 × 500 mm with FDM, up to 335 × 200 × 300 mm with SLA and up to 165 × 165 × 300 mm with SLS. If the part is larger than the build volume, printing it in several segments and joining them can be considered, depending on the design.

• Build volume of all printers

Yes. We ship finished parts throughout Serbia.

We use files and technical documentation solely to process the enquiry and carry out the agreed project.